Description
Note: This is supplied without the binder or the Gloss Standard and can only be purchased after a previous purchase of the full manual package and after supplying us with the ASM & RSM ref numbers that you will have been provided.
These manuals are intended to be used step-by-step by substrate, or as a reference guide to promote quality assurance in products and workmanship, where specified painting systems in new construction or refurbishment projects are used; they contains information necessary to:
- Evaluate paint products.
- Evaluate and select painting system.
- A painting specification.
- Select the surface preparation necessary.
|
ASM Contents:
- Introduction with contents, credit a how to use guide and other relevant information.
- Exterior Systems, Evaluation, Surface Preparation
- Exterior Systems Evaluation
- Exterior 198 water and solvent based systems
- Exterior Surface Preparation
- Interior Systems, Evaluation, Surface Preparation
- Interior Systems Evaluation
- Interior 316 water and solvent based systems
- Interior Surface Preparation
- Guide Specifications Painting, Wall-Covering, Abrasive Blasting
- Products Descriptions, Listings
- Miscellaneous Responsibilities, Standards, Quality Assurance
- Responsibilities
- Standards
- Quality Assurance
RSM Contents:
- Introduction contents, credits, a how to use guide, Identifiers, Int/Ext repainting Assessment.
- Identification assistance in identifying defects and failures that may affect current substrate.
- Exterior Assessment to assess the (DSD) Degree of Surface Degradation for Exterior surfaces.
- Interior Assessment - to assess the (DSD) Degree of Surface Degradation for Interior surfaces.
- Exterior Systems, Evaluation, Surface Preparation
- Exterior Systems Evaluation
- Exterior 175 water and solvent based systems
- Exterior Surface Preparation
- Interior Systems, Evaluation, Surface Preparation
- Interior Systems Evaluation
- Interior 258 water and solvent based systems
- Interior Surface Preparation
- Guide Specifications Painting, Wall-Covering, Abrasive Blasting
- Products Descriptions, Listings
- Miscellaneous Responsibilities, Standards, Quality Assurance
- Responsibilities
- Standards
- Quality Assurance
Additional information included:
- MPI Approved Products List
With over 230 MPI # Exterior and Interior categories; and the approved products that meet or exceed the specific standard definition. It contains national as well as regional manufacturers, It also Includes US, Canada and International editions, as well as Regulatory designations, LEED designations, MPI VOC ranges (E3-E0) and Green performance rating (GP1 or GP2). Now also includes the X-Green (Extreme Green) Categories and products.
- MPI Gloss Standard (Visual Standard) -MPI Gloss and Sheen levels (and drywall finishing levels required). Listing and displaying samples of Gloss level 1-7, against two NCS (Natural color system standards) Note: the gloss levels register replaces the previous gloss names register.
- MPI Identifiers - Defects and FailuresIncludes 125 color pictures and defines 81 different defects and failures commonly found with architectural/commercial paints and coatings. Its an excellent tool for assessing the surface prior to a repaint project to determine surface preparation and priming requirements, or to review the quality of a new paint job.
|